>>>M503
SENDING:M503
echo:  G21    ; Units in mm (mm)
echo:  M149 C ; Units in Celsius
echo:; Filament settings: Disabled
echo:  M200 D1.75
echo:  M200 D0
echo:; Steps per unit:
echo: M92 X200.00 Y200.00 Z400.00 E425.00
echo:; Maximum feedrates (units/s):
echo:  M203 X200.00 Y200.00 Z8.00 E50.00
echo:; Maximum Acceleration (units/s2):
echo:  M201 X1000.00 Y1000.00 Z100.00 E5000.00
echo:; Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
echo:  M204 P1000.00 R1000.00 T1000.00
echo:; Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
echo:  M205 B20000.00 S0.00 T0.00 X10.00 Y10.00 Z0.40 E2.50
echo:; Home offset:
echo:  M206 X0.00 Y0.00 Z0.00
echo:; Mesh Bed Leveling:
echo:  M420 S0 Z0.00
echo:  G29 S3 I0 J0 Z0.00800
echo:  G29 S3 I1 J0 Z0.02000
echo:  G29 S3 I2 J0 Z0.00000
echo:  G29 S3 I0 J1 Z0.02600
echo:  G29 S3 I1 J1 Z0.03900
echo:  G29 S3 I2 J1 Z0.03500
echo:  G29 S3 I0 J2 Z0.00000
echo:  G29 S3 I1 J2 Z0.02400
echo:  G29 S3 I2 J2 Z0.00500
echo:  G29 S4 Z0.19000
echo:; Material heatup parameters:
echo:  M145 S0 H190 B50 F0
echo:  M145 S1 H230 B75 F0
echo:; PID settings:
echo:  M301 P25.94 I2.12 D79.17
echo:  M304 P189.35 I36.69 D651.49
echo:; Linear Advance:
echo:  M900 K0.07
echo:; Filament load/unload lengths:
echo:  M603 L0.00 U100.00